Table of Contents
Advertisement
Quick Links
Hampshire Spindle Toddler Rail
WARNING:
!
• Failure to follow these warnings and assembly instructions could result in serious injury or death.
• Read all instructions before assembling toddler rail. Keep instructions for future use.
WARNING:
!
• Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding
under an infant.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless
otherwise advised by your physician.
Strangulation Hazard:
• Strings can cause strangulation! DO NOT place items with a string, cord or ribbon around a child's neck,
such as hood strings or pacifier cords. DO NOT suspend strings over crib or toddler bed, or attach strings to
toys for any reason.
• To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing on loose
fasteners.
• DO NOT place crib or toddler bed near windows where cords from blinds or drapes may strangle a child.
Fall Hazard:
• When child is able to pull to standing position, set mattress to lowest position and remove bumper pads,
large toys and other objects that could serve as steps for climbing out.
• When child is able to climb out or reaches the height of 35 inches (90 cm), the crib shall no longer be used
and the child should be placed in a youth or regular bed.
CAUTION: ANY MATTRESS USED IN THIS CRIB
!
MUST BE AT LEAST 27-1/4 INCHES (69 cm) BY 51-5/8
INCHES (131 cm) WITH A THICKNESS NOT EXCEEDING
6 INCHES (15 cm).
• Check this product for damaged hardware, loose joints, missing pats or sharp edges before and after
assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use crib if any
parts are missing, damaged, or broken. Contact The Land of Nod® for replacement parts and instructional
literature if needed. DO NOT substitute parts.
• If refinishing, use a non-toxic finish specified for children's products.
• Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
• Infants can suffocate in gaps between crib sides and a mattress that is too small.
• Periodically check to see that all bolts are securely tightened.
• To clean toddler rail: Wipe with clean soft cloth dampened with a mild cleanser and water. Rinse with clean
water using a soft cloth, and dry thoroughly.
• Follow warnings on all products in a toddler rail.
• When a vaporizer is in use, always aim vapor steam away from the toddler rail as well as away from other
wood furniture.
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: customerservice@landofnod.com • www.landofnod.com
Assembly Instructions
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for The Land of Nod Hampshire Spindle Toddler Rail
Summary of Contents for The Land of Nod Hampshire Spindle Toddler Rail
- Page 1 Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are missing, damaged, or broken. Contact The Land of Nod® for replacement parts and instructional literature if needed. DO NOT substitute parts.
- Page 2 Hampshire Spindle Toddler Rail Assembly Instructions This page lists the contents included in the box. Please take time to identify the hardware as well as the individual components of the product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
- Page 3 Hampshire Spindle Crib Assembly Instructions With the assistance of another adult, remove mattress panel from corresponding support pins of crib assembly. From the top of mattress panel, unfasten bolt caps off each support pin with a small Allen wrench. Set hardware and components aside until further instructions.
- Page 4 Hampshire Spindle Toddler Rail Assembly Instructions Release 1 side panel from crib assembly. Using a small Allen wrench, unfasten 1 small bolt through each bracket from top assembly as shown. Using a large Allen wrench, unfasten 1 large bolt, 1 spring washer and 1 half-moon bracket per corner from bottom assembly as shown.
- Page 5 Hampshire Spindle Toddler Rail Assembly Instructions Using a small Allen wrench, remove 1 small bolt and 1 bracket from right and left end panels as shown. Set hardware aside until further instructions. Secure 1 smalll bolt into corresponding hole at the top corners of the end panels with a small Allen wrench.
- Page 6 Hampshire Spindle Toddler Rail Assembly Instructions With the assistance of another adult, fit pre-assembled wood dowels of toddler rail into corresponding holes of end panels. Make sure bracket of each end panel is positioned securely into corresponding slot of toddler rail.
- Page 7 Hampshire Spindle Toddler Rail Assembly Instructions Locate lowest hole setting for the toddler bed mattress. Fit each support pin into corresponding corner as shown. Make sure support pin is securely engaged with assembly. NOTE: Make sure metal plate of mattress...
- Page 8 Hampshire Spindle Toddler Rail Assembly Instructions CLEANING AND CARE: Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Periodically check and tighten hardware as necessary. Once the crib is in use, periodically check to make sure all bolts are tight, and tighten as necessary. Keep these instructions for future use.
Need help?
Do you have a question about the Hampshire Spindle Toddler Rail and is the answer not in the manual?
Questions and answers