Advertisement
Connection to the Mains
WARNING: Double insulated do not
earth.
• Before connecting to the mains supply
ensure the mains voltage corresponds
to the voltage on the rating plate inside
the hood.
• This appliance is fitted with a 2 core
mains cable and must be permanently
connected to the electricity supply via
a double-pole switch having 3mm
minimum contact gap on each pole.
Chimney assembly
Upper Chimney
• To fit the upper chimney A, place the
top edge of the chimney over the
bracket C as illustrated and secure the
chimney using two of the 2.9mm self
tapping screws provided.
• The distance H in the height between
the fixing holes X1 and X2 is deter-
mined by the height of the upper chim-
ney A.
Lower Chimney
• To fit the lower chimney B, apply slight
force to the two rear edges to increase
the width of the apperture, then sleeve
the chimney B over the chimney A as
illustrated.
ENGLISH
9
B
S30_08_n
Advertisement
