Related Manuals for NextBase Uno Cinema Pro
Summary of Contents for NextBase Uno Cinema Pro
-
Page 1: Instruction Manual
Instruction Manual Uno Cinema Pro Duo Cinema Pro Professional Automotive Rear Seat Entertainment System... -
Page 2: Fcc Statement
Cinema Pro Instruction Manual Regulatory Statements FCC Statement This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 3: Safety Instructions
Cinema Pro Instruction Manual Safety Instructions Read through this manual carefully and observe the following safety instructions before operating this device. • Use only the car power cable and accessories supplied by dealer. Use of unauthorized accessories may void the warranty. • Do not install near any heat sources such as radiators, heat registers, stoves, or other equipment (including amplifiers) that produce heat. -
Page 4: Table Of Contents
Cinema Pro Instruction Manual Contents Introduction ....................5 Package Contents ................... 5 Uno Cinema Pro ..................5 Duo Cinema Pro ..................6 Specifications ....................7 Media Support List ..................8 Product Overview .................... 9 Player ......................9 Stanchion Mount ..................10 Remote Control ....................11... -
Page 5: Introduction
Users can easily send videos, pictures, and music from their portable device or USB flash drive to Cinema Pro to watch what they want. Package Contents The following items come with your package. If any of them is missing, please contact your local dealer. Uno Cinema Pro Player Stanchion Mount Quick Start Guide Remote Control... -
Page 6: Duo Cinema Pro
Cinema Pro Instruction Manual Duo Cinema Pro Players Quick Start Guide Stanchion Mounts Remote Control Carrying Bag Quick Start Guide 12V/5A 5V/2.4A T-cable 1 T-cable 2 T-cable 3 Cigarette Cable Lock Hex Key Charger L-wrench Note: ♦ The actual products might appear slightly different from illustration shown above. EN-6... -
Page 7: Specifications
• 2W (maximum) Maximum Output • 1.5W (typical) Total Harmonic 0.2% (maximum) Signal/Noise ≥ 60dB Channel Speaker ≥ 40dB Separation Dynamic Range ≥ 70dB 2Vpp (typical) Output Level (Input 0dB 1KHz) Acoustic Noise 50 dB Remote Control Key Support NEC Format (NEXTBASE 16-key RC) EN-7... -
Page 8: Media Support List
Cinema Pro Instruction Manual Item Description Operating Voltage 9V to 16V/2.2A Operating / Performance -10°C to 50°C Temperature -10°C to 50°C functional but may not meet Function Temperature specifications (any deviations must be recoverable) Storage Temperature -20°C to 60°C Housing Dimension 267 x 195 x 32 mm Unit Weight 1.750 kg Media Support List... -
Page 9: Product Overview
Cinema Pro Instruction Manual Product Overview Player IR Headphone LEDs Play/Pause Stop key Source key Volume (Down) key Power key Volume (Up) key Mount slot HDMI1 port HDMI2 port USB port Headphone jack Speakers DC IN jack Open button EN-9... -
Page 10: Stanchion Mount
Cinema Pro Instruction Manual Stanchion Mount Locking latches Bracket Latch pads Backplate DC IN jack AV IN port EN-10... -
Page 11: Remote Control
Cinema Pro Instruction Manual Remote Control Functions Overview IR Headphones button Function button Switch the IR headphones channel. Access the Function menu. Power button Turn this device on/off. Setup button Access the Setup menu. Source button Navigation buttons Switch the input source. • Navigate through menus and choose an item. -
Page 12: Getting Started
Cinema Pro Instruction Manual Getting Started Installing Cinema Pro in Vehicle This device is specifically designed to be mounted behind the driver and/or passenger seat(s). 1 Remove the headrest(s) and carefully route the cable(s). For Uno Cinema Pro Route the T-cable into the hole of the pole on the seat. EN-12... - Page 13 Cinema Pro Instruction Manual For Duo Cinema Pro Route the T-cable 2 and T-cable 3 into the holes of the poles on each side of the seat. Then from the bottom of the seat, connect both ends of the T-cable 2 and T-cable 3 to the T-cable 1 connectors.
- Page 14 Cinema Pro Instruction Manual 4 Position the bracket on the bars of the headrest. Fasten the screws on both locking latches to fix the bracket firmly on the bars. 5 Connect the player with the AV/Power cable (one end of the car power cable) as shown in the following illustration. 6 Slide the mount slot of the player into the backplate of the stanchion mount fully until it clicks into place.
-
Page 15: Basic Connection
Cinema Pro Instruction Manual 7 Adjust the player to the desired viewing angle. Note: ♦ To remove the player from the stanchion mount, pull and hold the release latch upwards and then slide the player off to disengage the connection. Basic Connection For proper connection method, refer to the illustration below. -
Page 16: Turning The Power On/Off
Cinema Pro Instruction Manual Turning the Power On/Off Make sure the cigarette charger is properly connected to the cigarette lighter socket of your vehicle. Turn the Power On If the Auto Power function is enabled, this device will automatically turn on when the vehicle engine starts up. -
Page 17: Making Connection
Cinema Pro Instruction Manual Making Connection This section guides you on how to insert a DVD disc and connect your Cinema Pro to an external device. Note: ♦ Do not unplug the USB flash drive or disconnect the cable connection during the file playback. -
Page 18: Connect To Hdmi Input Source
Cinema Pro Instruction Manual Connect to HDMI Input Source You can use this device to play your favorite multimedia content (videos, pictures, and music) from your portable device (i.e. smartphone or tablet). 1 Connect one end of the HDMI cable to the HDMI1/HDMI2 port of the player. 2 Connect the other end of the HDMI cable to the HDMI port of the portable device. -
Page 19: Connect Headphones
Cinema Pro Instruction Manual Connect Headphones Cinema Pro is equipped with built-in speakers. However, you may also use a set of headphones for personal listening. To use headphones, just plug in your headphone cable into the headphone jack of the player. With the built-in IR transmitter, you can use wireless headphones. -
Page 20: Monitor Sharing (Duo Cinema Pro Only)
Cinema Pro Instruction Manual Monitor Sharing (Duo Cinema Pro only) With this function, you can configure both players to play the same media content simultaneously. 1 Select the player that you want to be the primary screen. Then press the button. 2 Press the button to select (Monitor Sharing). 3 Press the button to confirm the selection. Both players will display the same screen. -
Page 21: Screen Mirroring With Your Smartphone
(Screen Mirroring). 3 Press the button to confirm the selection. Your player is now ready for connection. ID: NEXTBASE 685 IP: 192.168.59.254 PBC / pin code:15051691 4 On your smartphone, enable the Wi-Fi function and select your player (i.e. NEXTBASE XXX) from the network list. Android device iOS device EN-21... - Page 22 Cinema Pro Instruction Manual 5 Enable the “Screen Mirroring” function. Then select your player (i.e. NEXTBASE XXX) from the device list. Once connected, your smartphone display will be mirrored on the screen. Note: ♦ The available “Screen Mirroring” function may vary depending on the device UI or its operating system.
-
Page 23: Configuring The Settings
Cinema Pro Instruction Manual Configuring the Settings General Operations Switch the Input Source By default, this device is in DVD mode when it is turned on. To switch the input source, perform the following: 1 Press the button. HDMI1 HDMI2 Monitor Sharing Screen Mirroring 2 Press the... -
Page 24: Media Playback
Cinema Pro Instruction Manual Media Playback Selecting File (USB input only) Make sure you have plugged in a USB flash drive on the player. 1 Press the button to select the desired file. 00:00 00:00 002 / 009 System Volume Information P1010314 P1010315 song_01 song_02 song_03 Res. 225 x 300 2 Press the button to confirm the selection. • If a photo file is selected, the image appears in full screen. • If a music or video file is selected, the music/video starts playing automatically. -
Page 25: Using The Function Menu
Cinema Pro Instruction Manual Using the Function Menu To access the Function menu during playback, perform the following: 1 Press the button to bring up the Function menu. 2 Use the , or button to select the desired function. 3 Press the button to confirm the selection. -
Page 26: Adjusting The Screen Brightness
Cinema Pro Instruction Manual Adjusting the Volume Level To adjust the volume level, do the following: • Press the button on the remote control or touch the key on the player to decrease the volume level. • Press the button on the remote control or touch the key on the player to increase the volume level. -
Page 27: Configuring The Settings
Cinema Pro Instruction Manual Configuring the Settings DVD Menu (DVD/USB input source only) 1 Press the button to bring up the main menu. 2 Press the button to select (DVD Menu). Then press the button to enter DVD Menu. 3 Press the button to select a menu category. - Page 28 Cinema Pro Instruction Manual The following menu options are available in DVD Menu: Menu Option Description TV Display 16:09 4:3 Panscan Resume Function 4:3 Letter Box 16:9 Widescreen TV Display Select the aspect ratio. General Enable/Disable the resume function. When this function is enabled, the DVD system will remember the point in a DVD when the button was pressed during playback.
- Page 29 Cinema Pro Instruction Manual Menu Option Description Audio Subtitle English Disc Menu German Parental Control French Default Italian Spanish Swedish Select your preferred audio language from Audio those included on the DVD disc. Preference Select your preferred subtitle language from Subtitle those included on the DVD disc.
-
Page 30: Auto Power Menu
Cinema Pro Instruction Manual Auto Power Menu 1 Press the button to bring up the main menu. 2 Press the button to select (Auto Power Menu). 3 Press the button to select an option and press the button to confirm. •...