Remote Control Operation - Polk Audio I-Sonic 2 Instruction Manual

REMOTE CONTROL OPERATION

Loading Remote Control Batteries
1. Remove the back cover.
2. Insert two AA type batteries with correct (+) and (–) polarity.
3. Close the back cover until it clicks.
The batteries will last about 4 months with normal use. Change
the batteries as soon as you notice that the range of the remote
control is decreasing.
Remote Control Range
The distance between the remote control transmitter and the
preamp/processor should be 15 feet (5 meters) or less. If the transmitter
is pointed to a direction other than the IR SENSOR or if there is an
obstacle between them, the remote control may not work correctly.
Polk Customer Service (800) 377-7655
60˚
17