Voice Recognition - Cadillac SRX2008 Manual

Voice Recognition

The navigation system's voice recognition allows for
hands-free operation of the navigation system, audio
®
system, and OnStar features. The DVD map disc must
be installed in the navigation system for voice recognition
to work. See "Installing the DVD Map Disc" under Maps
on page 2-4. Voice recognition can be used when the
ignition is on or when Retained Accessory Power (RAP)
is active. See "Retained Accessory Power (RAP)" in the
Index of your vehicle's owner manual and for more
information.
To use voice recognition, do the following:
g
1. Push and hold the
until you hear a beep. The audio system, if on,
will mute.
2. Clearly state one of the commands listed on the
following pages.
4-2
(talk) steering wheel control
Helpful Hints for Stating Commands
•
When a multiple command is available, choose the
command that best works for you.
•
Words that are in brackets are optional. For
example, for the command Radio [band] [select] FM,
stating Radio FM or Radio select FM are both
valid commands.
•
When the system recognizes the command the
system will:
− either perform the function
− ask you to confirm your choice by clearly
stating "yes or no"
− issue an error message such as "System
does not recognize this command" or
direct you to "Please start speaking after
the beep"
•
If the system is not yet ready, the system may state
"System is checking the disc. Please wait.".
•
To cancel a command or if the system response
does not match your verbal command, press
and hold the talk symbol button. The system will
reply, "System will cancel the voice recognition".