Pitch Control; Tape Counter - Teac AD-850 Owner's Manual

Opening the cassette tape compartment
When the tape is stopped, press the TAPE EJECT (L) button to
open the cassette tape compartment.
o Do not press the TAPE EJECT (-) button during playback.
o You can also open the compartment when in modes other than
TAPE mode.
Fast-forwarding/Rewinding a tape
Press the Fast-forward (,) button or the Rewind (m) button to
wind the tape rapidly.
Winding stops when the end of the tape is reached. To stop
winding before the end, press the TAPE Stop (H) button.
< You can wind the tape when CD/USB/LINE is selected as a source.
These buttons do not, however, function when in a recording
mode.

Pitch control

This control varies the pitch of the music during playback.
Turning the PITCH CONTROL knob clockwise increases the playback
speed and raises the pitch by a maximum of +10%.
Turning the PITCH CONTROL knob counterclockwise reduces the
playback speed and lowers the pitch by a maximum of −10%.
o This does not function when recording to tape.
o Keep it set to the 12 o'clock (vertical) position for normal pitch.

Tape counter

Press the COUNTER RESET button to reset the tape counter to
"0000". You can use this function to easily locate any desired point
on the tape.
25