Teac AD-850 Owner's Manual page 23

Checking the program order
When playback is stopped, press the PROGRAM button repeatedly.
The numbers of the programmed tracks/files and their program
numbers will be shown in order.
Deleting tracks/files from the program
When playback is stopped, press the PROGRAM button repeatedly
until the program number of the track to be deleted appears
on the display.
Press the CLEAR button.
The track/file is deleted from the program.
Press
repeatedly
Press
repeatedly
Program number
to be deleted
Clearing the program
When playback is stopped, press the PROGRAM button, followed
by the CLEAR button or CD/USB Stop (H) button more than 1
second.
The PROGRAM indicator disappears and all the contents of the
program are cleared.
< If the PROGRAM indicator is not shown, press the PROGRAM button
to activate program mode before pressing the CLEAR button.
< If one of the following buttons is pressed, the contents of the
program are also cleared.
In CD mode
POWER button, CD OPEN/CLOSE (L) button, SOURCE
button
In USB mode
POWER button, SOURCE button
Exiting program mode
When playback is stopped, press and hold the PROGRAM button
more than 1 second or press the CD/USB Stop (H) button. The
PROGRAM indicator will disappear.
< This does not clear the contents of the program. Press the PROGRAM
button again and then press the CD/USB Play (t) button if you want
to restart program playback.
Press
at least
1 second
Press
at least
1 second
23