Preface - Filtermaster HP3.8B Installation Instructions Manual

Swimming pool Heat Pump

1. Preface

* In order to provide our customers with quality, reliab ility and versatility, this product has
been made to strict producing standards. This manual includes all necessary information
about installation, debugging, discharging and maintenance. Please read this manual
carefully
before you open or maintain the unit. The manufacturer of this product will not be held
responsible if someone is injured or the uinit is damaged, as a result of improper installation,
debugging or unnecessary maintenanc. It is vital that the instructions with in this manual are
adhere at all times. Only qualified person could install the unit.
* A qualified installer, centre, personnel or an authorized dealer, can only repair the unit.
* Maintenance and operation must be carried out according to the recommended time and
frequency, as stated in this manual.
* Use genuine standard spare parts only.
Failure to comply with these recommendations will void warranty.
* The swimming pool heat pump unit heats the swimming pool water and keeps the
temperature constant.
Our heat pump has following characteristics:
Durable
The heating exchanger is made of PVC & Titanium tube, which can withstand prolonged
exposure ot swimming pool water.
Easy operation
The unit is very easy to operate: switch it on and set the desired pool water temperatue.
Quiet operation
The unit comprises an efficient rotary compressor and a low-noise fan motor, which
guarantees its quiet operation. The unit can heat your swimming pool water when the air
temperature is 10.C or higher.
Low cost
The operational cost is very low due to its high performance
1