Lowrance HDS-8 Operation Manual page 111

To configure device location:
1. Select a device from the device list and press
Information screen will appear.
2. Highlight the
Configuration screen will appear.
3. Highlight the
4. Select the desired location and press
Instance
You can change a device instance from the Device Configuration screen. This,
however, should only be attempted by a qualified technician.
Calibrating devices
Several devices can be calibrated from the devices list including Fluid Levels, Fuel
Flows and Trim Tabs. Every device that can be calibrated from the devices list, will
have a calibrate button on the Device Information screen. The calibrate button opens
the Device Calibration screen, which has onscreen calibration instructions for the
device.
Calibrate button
To access calibration instructions:
1. Select the desired device from the device list and press
2. Highlight the
press enTeR. Follow the onscreen calibration instructions.
NOTE: For more information on device calibration, refer to
Configure button and press enTeR. The Device
Location dropdown menu and press enTeR.
Calibrate button on the Device Information screen and
the documentation that came with your device.
109
enTeR. The Device
enTeR.
Calibration instructions for a
fluid level
Settings
enTeR.