Keeper KWSL2000RM Assembly & Operating Instructions page 2

KWSL2000RM 2000 lb. 12VDC Electric Winch
Designed for Marine and Utility Recovery, Boats up to 18' and General Utility Winching Applications.
THIS PRODUCT IS NOT INTENDED FOR LIFTING/HOISTING
Assembly & Operating Instructions
!
CAUTION
PLEASE READ ALL SAFETY PRECAUTIONS AND WARNINGS BEFORE
INSTALLING AND USING THE WINCH! IF YOU HAVE QUESTIONS PLEASE
SEND A MESSAGE VIA WINCHES@HAMPTONPRODUCTS.COM OR
CALL 1 800-533-7372
Introduction
Thank you for purchasing your KEEPER
PLEASE READ ALL INSTRUCTIONS, PAYING SPECIAL ATTENTION TO THE
SAFETY INSTRUCTIONS.
Thank you for purchasing a KEEPER WINCH. We hope you will be pleased with your purchase. Your winch
was designed for non-industrial use. As with any power tool there is a potential for personal injury if your
winch is improperly installed or operated. It is extremely important that anyone operating this winch reads
and understands this manual prior to installing and operating this winch.
Save this Manual
You will need this manual for the safety warnings and cautions, assembly instructions, operating proce-
dures, maintenance procedures, trouble shooting, parts list, and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep both this manual and your invoice
in a safe, dry place for future reference.
KWSL2000RM WINCH SPECIFICATIONS
Capacity
Max Boat Size:
Max Boat Weight:
Line Speed:
Current Draw
Cable Length:
Hook Size:
Power Supply
Power Cord:
Remote Switch
RAPID MOUNT Plate:
Winch Dimensions:
Net Weight:
Pulling capacity of winch is rated on first layer of wire rope on the drum. As you accumulate layers
your pulling capacity will diminish by 10-15% per layer.
2
!
® Winch.
6000 lb. Rolling Load
5000 lb. Boat fully loaded up to 18' long
2000 lb. Pulling Capacity
18 Feet
5000 lb.
6 Feet/Minute with Load
6 Amps @ 150 lbs.
20 Amps @ 2,000 lbs.
30 Feet
3/4" Opening x 3-3/4" L.
12 Volts DC
6' Long Negative Lead with attachment clip
20' Long Positive Lead with attachment clip
On 10' lead
8-3/4" x 4-15/16" x 3/16"
9-1/2" x 7-1/2" x 10"
24 lbs.