Polaroid DIGITAL PHOTO PRINTER User Manual page 4

Polaroid ColorShot Parallel User's Guide
4. Turn off your computer.
Note: If you have more than one printer and only one parallel port
on your computer, you can purchase a manual or automatic
electronic switching device that allows you to connect both
printers through the same parallel port. For more information,
refer to Electronic Switching Devices in the Troubleshooting
section of this manual.
Install the Polaroid ColorShot Hardware
1. Place the ColorShot Parallel printer horizontally, on a flat surface
near your computer.
Note: Do not position the printer vertically.
2. Make sure your computer is turned off.
3. Connect the printer power cord (3) to the AC adapter (4).
4. Connect the AC adapter (4) to the receptacle on the printer.
•
2 English
1. Printer
2. Power indicator light
3. Printer power cord
4. AC adapter
5. Printer interface cable
Revised 8/17/98