Making A Call - Huawei QISETS2205 Manual

Vertically
Pull out the handset retaining clip from the slot turn it around and then push it back so
1.
that the handset will not fall down when the FWT is placed vertically.
According to the distance between the two hooks (7.7 cm), hammer two nails into the
2.
wall with a 3 mm end left outside.
Snap the hooks to the nails.
3.
Validating
You can make a call to check whether the FWT is correctly installed.
Press and hold to power on the FWT. After connecting the FWT with the external
1.
power supply, the icon appears, indicating that the FWT is powered normally.
Lift the handset. In standby mode, the signal strength icon appears normally.
2.
If you can make a call, it indicates that the FWT is installed correctly.
3.

Making a Call

Method 1:
Lift the handset or press
1.
Enter the number. If the number is incorrect, press CANCEL key to delete it.
2.
Press to dial the number.
3.
4. After the conversation, put down the handset or press
Method 2:
Enter the number you want to dial without lifting the handset or pressing
1.
2. Press to change the FWT to the hands-free mode and dial the number.
After the conversation, put down the handset or press
3.
Note:
In the standby mode, if there is a missed call, the phone number of the missed call is
displayed on the screen. At this time, you can press
missed call.
.
to end the call.
to end the call.
to dial the number of the
.