Basic Operations; When The Tv Is Initially Powered On; Switching On/Off; Tv/Av Mode Selection - Polaroid LCD-1550 Operation Manual

B A S I C
O P E R A T I O N S
When your TV is powered on for the first time, the left figure is
displayed.
1 Pressing VOL up/down (œ/√) buttons makes a selection
2 Wait until the searching ends.
! !
• If you press power button while channel searching, this process
1
SWITCHING ON
1 If the indicator is not lit, the TV set is powered off.
2 Press the POWER button on the remote controller, or VOL
SWITCHING OFF
! !
1 To set the TV set back to stand-by mode, press the POWER
If you don't use the set for extended
periods of time, unplug the AC cord from
power outlet.
2 Press the POWER button on the TV set to switch the TV set
2
By pressing the TV/VIDEO button on the TV set, you can
change the mode as follows:
TV
14

WHEN THE TV IS INITIALLY POWERED ON,

between AIR or CABLE mode which automatically starts a
channel search.
stops and goes back to initial status.

SWITCHING ON/OFF

You must press the POWER button of the TV set.
(...†) / CH (...†) button on the TV set when the indicator
is red. The TV set will be switched on and the indicator will
be changed to green.
button on the remote controller or press the MENU button
on the TV set for 2 seconds. The indicator will become red.
off completely.
* If you turn the TV off, the present time that you have set
will disappear.

TV/AV MODE SELECTION

VIDEO S-VIDEO COMPONENT PC TV ....
With the remote controller, you can select the mode as below.
• TV/VIDEO button : Selection for TV/VIDEO/S-VIDEO input
mode.
• PC button : Selection for PC monitor input mode.
• COMPONENT button : Selection for Component input mode.
! !
• If CH(.../†) buttons are pressed in external mode, it turns to TV
mode.
3

VOLUME CONTROL

Adjust the volume with VOL (œ/√) buttons.
TO MUTE THE SOUND
Press the MUTE button on the remote controller to cut the
sound off. The MUTE will be displayed for 3 seconds. By
pressing either the MUTE button or VOL (œ/√) buttons, you
can get sound back.
4

CHANNEL SELECTION

The TV set has 68 channels [AIR02 ~ AIR69] in AIR mode and
125 channels [CATV01 ~ CATV125] in CATV mode. (Refer to
next page for each selection.)
DIRECT SELECTION
The numeric buttons are used for direct channel selection.
To select two-digit channels, press the second number button
within 2 seconds after the first number.
To select 3-digit channels, press '+100' button before pressing
the rest of number buttons in order.
• Channel number in green : Memorized channels by automatic
search or added channels by user
Channel number in white : Skipped channels by automatic
search or deleted channels by user
UP/DOWN SELECTION
You can also select a memorized channel by pressing the CH
(.../†) buttons.

basic operations

15