Pc Adjustment - Polaroid LCD-1550 Operation Manual

Lcd flat panel hdtv
Table of Contents

Advertisement

4
PC mode input format
In case of inputting the PC signal other than above signals,
"OUT OF RANGE" will appear on the screen.
Before adjustment, please setup your PC software...
Even if your actual display-settings screen looks different from
the windows below, basic setup methods will be applied in
most of the cases.
1 First, click on "Settings" on the Windows Start menu.
2 When the control panel screen appears, click on "Display"
3 Navigate to the "Settings" tab on the display dialog-box.
22
MENU adjustment

PC ADJUSTMENT

(ONLY IN PC MODE)
Resolution
V freq. (Hz)
640*480
60
640*480
72
VGA
640*480
75
640*480
85
720*400
70
800*600
60
800*600
75
SVGA
800*600
85
800*600
72
1024*768
60
XGA
1024*768
70
1024*768
75
While "Settings" is selected, move the cursor to submenu
"Control Panel".
and a display dialog box will appear.
The correct setting of size (resolution) is "1024 x 768
pixels". (optical resolution)
Check the vertical frequency of your PC. (Available vertical
frequency at 1024*768 mode : 60Hz, 70Hz, 75Hz)
H freq. (KHz)
31.5
37.9
37.5
43.3
31.5
37.9
46.9
53.7
before adjustment
48.1
48.4
56.5
60.2
before adjustment
expand OFF
Press MENU ( ) button to display the MENU screen.
Select "PC" by pressing VOL (œ/√) buttons and press CH down
(†) button to enter into the items below.
H-POSITION
1 Move to "H-POSITION" by pressing CH (.../†) buttons.
2 Press VOL (œ/√) buttons to adjust the horizontal position of
displayed image.
after adjustment
V-POSITION
1 Move to "V-POSITION" by pressing CH (.../†) buttons.
2 Press VOL (œ/√) buttons to adjust the vertical position of
displayed image.
after adjustment
H-SIZE
1 Move to "H-SIZE" by pressing CH (.../†) buttons.
2 Press VOL (œ/√) buttons to adjust the horizontal size of
displayed image.
PHASE
(Fine image adjustment in PC monitor mode)
1 Move to "PHASE" by pressing CH (.../†) buttons.
2 Press VOL (œ/√) buttons to adjust the phase to get a clearer
picture.
SCREEN EXPAND (only 17" wide model)
1 Move to "SCREEN EXPAND" by pressing CH (.../†) buttons.
2 Press VOL (œ/√) buttons to select screen expand type. You
expand ON
can select a Screen Expand successively that has its own
aspect ratio.
MENU adjustment
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lcd-1750

Table of Contents