Connecting External Equipment - Polaroid LCD-1550 Operation Manual

You can enjoy picture and sound by connecting VCR, DVD
player (or DTV Set-Top Box) and PC to the terminals located on
the back of TV set.
Before connecting an external device, turn the TV set off to
avoid any possible damage.
PC AUDIO
%
DC 12V
Personal Computer
PC RGB
TV Monitor
!
12

CONNECTING EXTERNAL EQUIPMENT

@
$
DVD
DTV Set-Top Box
#
Camcorder
VCR
connections
! !
VIDEO and S-VIDEO in AV IN share the
same jack with AUDIO input. Thus, they
can't be used at the same time.
Headphone
Video game
!TV output terminal [MONITOR OUT]
These jacks have TV, VIDEO/AUDIO outputs. These jacks are
used to connect a TV Monitor.
The image signals coming into COMPONENT, S-VIDEO or PC
will not be transmitted to MONITOR OUT terminals.
@DVD or DTV Set-Top Box input terminal [COMPONENT IN]
These jacks have Y/Pb(Cb)/Pr(Cr) inputs and AUDIO inputs.
These jacks are used to connect a DVD player, DTV Set-Top
Box. (Available input mode : 480i, 480p, 720p, 1080i)
#External AV devices input terminal [AV IN]
These jacks have VIDEO/AUDIO/S-VIDEO inputs. Connect
them to VCR, Camcorder or Video game with RCA or S-VIDEO
cable.
* If your AV device has both VIDEO OUT terminal and S-
VIDEO OUT terminal, S-VIDEO connection is recommended
for better picture quality.
! !
Whenever you connect external equipment system to TV, make sure
that all elements are switched off. Refer to the documentation
supplied with your equipment for detailed connection instructions and
associated safety precautions.
$Headphone Jack
Insert the headphone plug (3.5mmØ) into this jack. The
sound from the speaker will be automatically cut off. You
can control the headphone sound with Volume Up/Down
(œ/√) buttons.
* Headphones are not included in the supplied accessories.
% PC In
Connect the D-sub 15 pin cable and the audio cable with
personal computer.
* See page 22 for more information of PC mode.
connections
13