Table of Contents
Advertisement
Changing Channels
Using the Channel Buttons (CH+ or CH-)
Press the
CH+ CH-
or
to change channels.
When you press the
CH+ CH-
or
You will not see channels that were erased.
Direct Accessing Channels
Press the
number buttons
to go directly to a channel.
To select a one-digit channel: press the
seconds, and the unit automatically goes to the selected channel
To select a two-digit channel: press the
To select a three-digit channel: press the
in CABLE mode
).
Note:
When you use the number buttons, you can directly select channels that were erased.
Using the LAST button
Press this button to switch between the current channel and the previous channel.
Adjusting the Volume
Using the volume buttons (VOL+ and VOL-)
Press the
VOL + VOL- increase decrease
or
to
Using the Mute
Using the MUTE button
At any time, you can temporarily cut off the sound using the MUTE button.
1
Press the MUTE button and the sound cuts off.
2
To turn mute off, press the MUTE button again.
Basic Operations
, the unit changes channels in sequence. You will see all the channels that the unit has memorized.
0-9 number buttons
to input the channel number, followed by ENTER button or wait for some
0-9 number buttons
to input the channel number and the unit goes to the selected channel .
0-9 number buttons
to input the channel number and the unit goes to the selected channel (Only
or
the volume.
.
20
Advertisement
Table of Contents
