Honda CBR 125RW 2007 Owner's Manual page 163

If You Have a Flat Tire
4. Install the drive chain by pushing the
rear wheel forward.
5. Install the rear axle nut and tighten the
drive chain adjusting bolts.
Refer to drive chain adjustment (page
1 12).
6. Tighten the rear axle nut to the
specified torque:
59 N-m (43 Ibf-ft)
Failure to provide adequate disc-to-rear
brake bracket clearance may damage
the brake discs and impair braking
efficiency.
7. After installing the wheel, apply the
brakes several times, then recheck both
discs for caliper holder to disc clearance.
Do not operate the motorcycle without
adequate clearance.
If a torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Improper assembly may lead to loss of
braking capability.
Taking Care of the Unexpected 153