Table of Contents
Advertisement
ASSEMBLY
It is recommended that you wear gardening gloves are worn, when unpacking, adjusting, assembling
and maintaining the lawnmower.
Remove the machine and contents from the carton. Be sure the carton is empty before discarding.
If you require any assistance with regards to the contents of the lawnmower contact us:
Mon – Fri 8.00am – 5.30pm (excl. Bank Holidays)
Tel: 01793 333212
Email: customerservice@handydistribution.co.uk
You will require a Phillips (crosshead) screwdriver and an 10mm spanner to assemble this machine.
HANDLE ASSEMBLY
Attach the lower handle to the machine body by sliding the two holes (one on each side) over the
two pegs (one on each side) of the lawnmower body. You will have to squeeze the handle quite
firmly, to place over the two prongs.
Align the two holes on each of the middle handles with those on the lower handle. Secure with the
four longer screws and nuts provided.
Advertisement
Table of Contents
