Component Replacement Procedures; Display Assembly - HP Compaq 6530s Replacement Manual

Component replacement procedures

Display assembly

NOTE: All display assembly spare part kits include 2 WLAN antenna transceivers and cables.
Description
For use only with HP Compaq 6535s Notebook PC models
14.1-inch, WXGA BrightView display assembly with camera
14.1-inch, WXGA BrightView display assembly
14.1-inch, WXGA display assembly with camera
14.1-inch, WXGA display assembly
For use only with HP Compaq 6530s and 6531s Notebook PC models
14.1-inch, WXGA BrightView display assembly with camera
14.1-inch, WXGA display assembly with camera
14.1-inch, WXGA BrightView display assembly
14.1-inch, WXGA display assembly
Remove the display assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Turn the computer upside down on a flat surface, with the battery bay toward you.
5. Slide the battery release latches (1) to release the battery.
ENWW
Spare part number
493155-001
493154-001
493152-001
493151-001
491643-001
491642-001
491641-001
491640-001
Component replacement procedures 5