Troubleshooting - Polaroid PDV-1008N Operation Manual

Troubleshooting

Symptom
The player doesn't play.
There is no sound.
There is no picture.
Poor AV performance.
Cannot continue to play and
play a section repeatedly.
The remote control does not
work.
Other possibilities:
Static or other external interfere may cause the player to function abnormally. In this case
unplug the power-supply cord from the outlet and plug it in again to reset the player so that
normal operation can resume. If you are still having problems, disconnect the power and
consult a qualified technician.
What To Check
• Make sure the AV IN/OUT switch on the side of the
player unit is in the OUT position for standard play.
• Make sure the disc cover is closed.
• Make sure a disc is loaded.
• Make sure the disc isn't loaded upside down.
• Disc should be clean, not dirty or warped.
• Player's region code should be the same as region
code of DVD disc.
• Has water condensation has occurred? If it has,
remove the disc and keep the player powered up
for at least two hours.
• Make sure system connection is correct.
• Make sure the speakers are turned on.
• Make sure the sound setup of DVD disc is correct.
• Is your disc dirty or warped? Clean or replace disc.
• Make sure TV is on and in correct video mode.
• Make sure your system connection is correct.
• Is your disc dirty or warped? Clean or replace disc.
• Make sure the player is not in A-B repeat status.
• Press A-B button to cancel A-B repeat status.
• Is your disc dirty or warped? Clean or replace disc.
• Make sure there aren't any obstructions between
the remote control and the player.
• Make sure you are pointing the remote control at
the player.
• Make sure batteries are inserted correctly (check
polarity).
• Replace weak batteries.
- 25 -