Table of Contents
Advertisement
System Setup
OSD Lang
3.
There are five kinds of different OSD languages for selection.
4. SPDIF Output
This item is used to set the format of digital audio. 'SPDIF OFF' turns off the digital
audio; 'SPDIF/RAW' outputs the original. For example, if the disc being played is
Dolby Digital, then the digital audio output is also Dolby Digital. Select 'SPDIF/PCM'
when you connect with a 2 channel digital stereo amplifier.
5. Captions
Switches on screen captions on or off during playback.
6. Screen Saver
When activated, the screen saver automatically starts if there has been no operation
for a period of time.
Speaker Setup
1. Downmix
Select "LT/RT" in DOWNMIX, then the player will output mixed audio in a way prescribed
by Dolby. Select "Stereo", then the
Dolby Digital Setup
1. Dual Mono
The function is used to set the output mode of channel left/right, stereo and mixed
sound.
2. Dynamic
Use this item to adjust linear dynamic compression rate to get different signal compression
effects.
Video Setup
1. Sharpness
Use this item to adjust sharpness setting.
player will output a stereo signal.
- 20 -
Advertisement
Table of Contents
