Troubleshooting - Polaroid PDM-1040 User Manual

Troubleshooting

If you suspect there is something wrong with the DVD player, immediately turn the power
off.
Disconnect the power connector and check that there is no smoke or excessive heat
coming from the unit.
Never open or try to repair the unit yourself. There are no user serviceable parts inside.
PROBLEM
The player cannot
play.
There is no sound .
POSSIBLE CAUSE
The disc cover may not be
closed.
There may not be any discs
in the DVD drive.
The disc may not be put in
with the right way.
The disc may be dirty or
warped.
The player's region code
may not as the same as the
region code of DVD disc.
There may be water on the
lens.
The system connection may
be not correct.
The speakers may be turned
down.
The sound setup of the DVD
disc may be not correct.
The disc may be dirty or
warped.
43
POSSIBLE SOLUTION
Close the disc cover.
Put a disc in to the DVD drive.
Put the disc in with the label
side up.
Clean or change the disc.
Make sure the
region code is the same as
the region code of DVD disc.
Remove the disc and keep
the player being powered off
for at least two hours.
Connect the
correctly.
Turn on the speaker.
Setup the sound of the DVD
correctly.
Clean or change the disc.
player's
system