Polaroid PDM-1040 User Manual page 36

General Setup Page
System Setup
2.Angle Mark
This item is used to turn the Angle Mark on or off.
Press or button to highlight this item. Press
ENTER or to enter the setup of this item.
Press or button to choose turn angle mark on
or off. Press ENTER to confirm your selection.
Press to exit from this item.
3.OSD Language
This item is used to set the OSD (on-screen display)
language. Press or
item. Press ENTER or
item.
It includes English, French and Spanish, etc.
English by default.
Press or button to choose the proper one.
Press ENTER to confirm your selection. Press
exit from this item.
4.Screen Saver
This item is used to turn the screen saver on or off.
Press or button to highlight this item.
Press ENTER or
The default setting of this item is on.
Press or button to choose on or off.
Press ENTER to confirm your selection.
Press to exit from this item.
5. Last Memory
This item is used to set last memory state.
Note: The last memory is referred to the state that if
you stop watching a program on DVD and go back
to it later, the program begins playing from where
you are left off. Press
item. Press ENTER or
item.
The default setting of this item is on.
Press or button to choose on or off.
Press ENTER to confirm your selection.
Press to exit from this item.
36
button to highlight this
to enter the setup of this
to enter the setup of this item.
or button to highlight this
to enter the setup of this
to