NUANCE SafeCom Controller Administrator's Manual page 20

2 SafeCom Controller
8. Information is retrieved from the SafeCom Controller. Click Next.
9. Enter the Printer address (the device IP address or host name) and click
Next.
10. Information is then retrieved from the device. Click Next.
11. Now select the type of device and click Next.
12 Enter the username and password.
13. On the Settings tab, make sure to specify the properties of the device
(duplex and color supported).
14. Click Add to register the device and save it in the database.
After approx. 1 minute the SafeCom Controller has restarted and you can
verify the connection to the printer by pressing the test button once on
the SafeCom Controller's rear panel.
D60700-07 19