Diagnostic Commands - Acer AIR-104 User Manual

Chapter 7

Diagnostic Commands

7-5
show dhcp
Description: This command displays the current status of the Dynamic Host Control
Protocol server.
Example:
Command> show dhcp
Admin Status:
Network address:
Default gateway:
Primary DNS:
IP-Address
------------------------------------------------------------------------------------------------------------
192.168.167.134
192.168.167.229
show dhcp table
Description: This command displays the entries currently configured in the Static DHCP
Assignment Table
Example:
Command> show dhcp table
Static Dhcp Assignments
Name
----------------------------------------------------------------------------------------------------------
daniel
connect profile isp 1
connect profile isp 2
Description: For Internet profiles, this command activates the specified profile as if a
trigger occurred.
disconnect profile isp 1
disconnect profile isp 2
Description: For active Internet connections, this command terminates the connection as
if an idle timeout occurred.
enable/disable trace
Description: This command enables or disables the debug trace messages. When
enabled, all log messages entered into the system log will appear in the console session
from which this command is issued.
Command Line Interface
Enable Default Lease:
192.168.168.0 Netmask:
192.168.168.207
199.191.129.139Secondary DNS:
Mac-Addr Lease-Expires
00400535db4f 06-15-99 14:24:5
222222222222 06-15-99 16:43:7
IP-Address
192.168.168.134
10 hours
255.255.255.0
199.191.144.75
Entry Type
Static
Dynamic
Mac-Address
00-40-05-35-DB-4F
User Guide for AIR-104/AIR-204