Table of Contents
Advertisement
Chapter 3
3-4
Check each of the following settings under its indicated tab:
Step 8
-Bindings Tab: both Client for Microsoft Networks and File and printer sharing
for Microsoft Networks should be selected.
-Gateway Tab: All fields should be blank
-DNS Configuration Tab: Disable DNS should be selected
-IP Address Tab: Obtain IP address automatically should be selected
If you do not disable DNS on every PC that is connected to the network,
Note:
then the Windows operating system may emit DNS broadcast packets, which may
in turn cause the AIR-104/204 to dial up your ISP even if there is no real Internet
traffic.
Make sure that both the PC and the AIR-104/204 are properly connected to
Step 9
the network, and then reboot the PC. The PC should now be prepared to
communicate with the AIR-104/204.
Configuring PC's
User Guide for AIR-104/AIR-204
Advertisement
Table of Contents
