Connecting The Camera To Your Pc - Polaroid PDC 3000 User Manual

turn off the computer and the camera, and disconnect the
camera as described on page 53. Refer to Using the PDC-
3000 camera on page 56 for picture-taking instructions.
If you will take pictures while using the computer to control
the camera, leave the camera connected to the computer.
Refer to Using the PDC-3000 with your
PowerMac/PowerPC on page 113.

Connecting the camera to your PC

The PDC-3000 camera is an internally terminated SCSI
device designed to connect to a SCSI adapter on your IBM-
compatible computer. How you connect the PDC-3000
depends on whether you have other SCSI devices connected
to your computer.
Note: Be sure to set the camera's SCSI ID as described on
page 24 before connecting the camera. Also, your IBM-
compatible computer must have an ASPI-compliant SCSI
adapter for attaching the camera. See System requirements on
page 14 for more information.
Setting up 43