Viewing picture
information
Rotating pictures
Using the PDC-3000 with your PowerMac/PowerPC
When the Transfer Pictures window is open, you can display
the same information described in Previewing pictures above.
Select the desired thumbnail as described on page 123. Then
choose the Get Info button or hold down the
key and press the I key to display the image information
window.
You can rotate a picture in 90-degree increments to change
its orientation from landscape to portrait or vice versa.
To rotate one or more pictures:
1 View the pictures in the camera as described on page 120.
GETINF.BMP
(Command)
126