Garmin G5 Install Manual & Pilot's Manual page 142

Unit Installation
Configuration
Setting
Controls whether the flight director command indicator on the PFD
Indicator Type
uses a single-cue or dual-cue presentation.
Select Normal (default) or Simplified. Selecting Simplified results in
a simpler set of behaviors for altitude hold mode.
When Altitude Controls is set to Normal, ALT Mode User Select
Altitude Action and ALT Mode User Up/Down Action will appear.
Controls
When Altitude Controls is set to Simplified, the ALT Mode User
Select Action and ALT Mode User Up/Down Action settings do not
appear. In their places, selections for the default climb and descent
vertical speeds are displayed.
Select Normal or Sync Selected Altitude. This setting controls the
actions that occur when the user selects altitude hold mode by
pressing the ALT key on the GMC 305/307. When set to Sync
ALT Mode User
Selected Altitude, the selected altitude (altitude bug) will be
Select Action
automatically set to the current aircraft altitude when the user
selects altitude hold mode manually by pressing the ALT key on the
GMC 305/307.
Select Normal or Select VS Mode. This setting controls the actions
that occur when the flight director is in altitude hold mode and
ALT Mode User the user moves the pitch wheel on the GMC 305/307. When set
Up/Down Action to Select VS Mode, moving the pitch wheel on the GMC 305/307
results in a change to VS mode for a climb or descent to a new
altitude.
Used to limit the maximum roll attitude commanded by the flight
director for aircraft that have unusual attitude limitations. This
Maximum Bank
setting should not be adjusted from the default of 30° except for
Angle
very high performance aircraft that have bank angle limitations at
high speeds.
126
Table 1-26 Flight Director Configuration Settings
Garmin G5 Install Manual & Pilot's Guide
Description
190-02072-00 Rev. E