Installing A Chargepak A1 - PURE One Mi Series 2 Manual

Installing a ChargePAK A1

1. Switch One Mi off and disconnect from the mains power supply.
2. Open the battery compartment (A).
3. Place the ChargePAK in the right hand end of the compartment,
logo side out (B).
3. Slide the ChargePAK to the left until it clicks into place on the
ChargePAK connector.
4. Replace the battery cover (C) and connect One Mi to the mains.
5. ChargePAK will begin charging.
Note: When charging your ChargePAK for the first time or after an
extended period of inactivity it is recommended that it is charged
for around 24 hours to ensure full battery power. If ChargePAK
is completely flat there may be a slight delay before the battery
charging indicator is displayed.
A
B
C
13