Table of Contents
Advertisement
Fingered Chord
When the rhythm is playing, press the "FINGERED" button, "FIN" will appear on the display. The fingered
chord can be performed on the chord keyboard.
Major (M)
Major 7
(M7)
th
7
suspended 4
(7sus4) Minor 9
th
th
Chord O
Press the "CHORD OFF" button to stop the chords.
Chord Timbre Selection
While chord accompaniment is in use, the timbre of chord can be changed by pressing the "CHORD
TIMBRE" button. Press the button again to return to the original timbre.
EFFECT CONTROL
Sustain
Press the "SUSTAIN" button, "SUS" will appear on the display. The keystrokes will have a sustain e ect.
Press the button again to stop.
Vibrato
Press the "VIBRATO" button, "VIB" will appear on the display. The keystrokes will have a vibrato e ect.
Press the button again to stop.
Transpose
Press the "TRANSPOSE ↑" and "TRANSPOSE ↓" button to transpose the tone of the notes. The
transpose may be adjusted from "-6" to "+6." Press both buttons at the same time to revert to the preset
stage "0."
Tune
Press the "TUNE ↑" and "TUNE ↓" buttons to change the pitch from anywhere from "-99" to "+99." Press
both buttons at the same time to revert the pitch to the preset stage of "0."
Double Keyboard
Press the "SPLIT" button, "SPLIT" will appear on the display. The keyboard will divide into two
sections—the 24 keys on the left and the rest of the keys—to form a double keyboard. The timbre of the
two sections can be di erent; the left section keeps the primary timbre while the right section uses a
secondary timbre. Meanwhile, the pitch of the left section will rise by 8 while the right section will lower
by 8 to di erentiate the two sections from each other. Press the "SPLIT" button again to stop this
function. This function will exit when using auto-chord.
Pg. 10
Minor (m)
Minor 7 flat (m7♭5)
Diminished (dim)
(m9)
Minor Major 7
th
Seventh (7)
Minor 7
Augment (aug)
(mM7)
7
flat 5
th
th
(m7)
Diminished 7
th
Suspended 4
th
(7♭5)
9
(9)
th
th
(m7)
th
(sus4)
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SKY1036 and is the answer not in the manual?
Questions and answers
I got this keyboard when it first came out in 2017 my mom got it and she recently passed away so it's very dear to me I have the cord that plugs into it but when I started up it doesn't produce any sound I can see on the screen it registering what keys I play so I know that the keys are working but there is no sound coming out please help.
To fix a sound issue on your BCP SKY1036 keyboard, try the following steps:
1. Check the Volume: Ensure the master volume and accompaniment volume are turned up using the volume controls on the front panel.
2. Power Cycle: Turn the keyboard off using the power switch, wait a few seconds, then turn it back on.
3. Reset Tuning and Transpose:
- Press both “TUNE ↑” and “TUNE ↓” buttons at the same time to reset pitch to 0.
- Press both “TRANSPOSE ↑” and “TRANSPOSE ↓” buttons at the same time to reset transpose to 0.
4. Exit Any Active Function: Press the corresponding button (e.g., “ENSEMBLE” or “FOLLOW”) again to quit any special mode.
If the issue continues, additional troubleshooting or inspection may be needed.
This answer is automatically generated
I cannot figure out why I can't get sound to come out of either the headphones when plugged in our the built in speakers