Eagle 2000 B Operation Manual page 21

3.4 Navigating LCD Screens

Job Mode / Top Wait
This mode is used when a cover will be placed on the top of the
package.
To begin, press Start button
The machine will wrap the package once at the bottom and the
carriage will travel to the top of the package and pause for the
operator to place a cover on the package. To continue, press
the Start button. The machine will wrap the number of times set
in the top cycle parameter and the carriage will travel back
down to the bottom of the package were it will wrap the number
of times set in the bottom cycle parameter.
To the bottom left of the screen, there is a text notifier that
displays machine status.
Job Mode / Slow Wrap
This mode is used when wrapping a tall unstable load.
To begin, press Start button
The machine will wrap around the package with a slow turntable
rotation speed and low tension. Once the carriage reaches the
top of the package, it will change to a normal tension cycle
based on the preset parameters and continue wrapping to the
bottom of the package.
To the bottom left of the screen, there is a text notifier that
displays machine status.
- 21 -