Related Manuals for Miller Coolmate 1.3
Summary of Contents for Miller Coolmate 1.3
- Page 1 OM-257811C 2017−02 Processes TIG (GTAW) Welding MIG (GMAW) Welding Description Coolmatet1.3 File: TIG (GTAW) For product information, Owner’s Manual translations, and more, visit www.MillerWelds.com...
- Page 2 We know you don’t have time to do it any other way. That’s why when Niels Miller first started building arc welders in 1929, he made sure his products offered long-lasting value and superior quality.
-
Page 3: Table Of Contents
TABLE OF CONTENTS SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING ....... . . 1-1. -
Page 5: Section 1 − Safety Precautions - Read Before Using
SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING coolers 2016-08 Protect yourself and others from injury — read, follow, and save these important safety precautions and operating instructions. 1-1. Symbol Usage DANGER! − Indicates a hazardous situation which, if Indicates special instructions. -
Page 6: California Proposition 65 Warnings
STEAM AND HOT COOLANT can burn. MOVING PARTS can injure. D Keep away from moving parts such as fans. Hose may rupture if coolant overheats. D Keep all doors, panels, covers, and guards D Visually inspect condition of hoses before each closed and securely in place. -
Page 7: Section 2 − Consignes De Sécurité − Lire Avant Utilisation
SECTION 2 − CONSIGNES DE SÉCURITÉ − LIRE AVANT UTILISATION Cooler 2016−08_fre Pour écarter les risques de blessure pour vous−même et pour autrui — lire, appliquer et ranger en lieu sûr ces consignes relatives aux précautions de sécurité et au mode opératoire. 2-1. -
Page 8: Proposition Californienne 65 Avertissements
LA VAPEUR ET LE LIQUIDE DE LIRE LES INSTRUCTIONS. REFROIDISSEMENT CHAUD peuvent provoquer des brûlures. D Lire et appliquer les instructions sur les étiquettes et Mode d’emploi avant Un tuyau peut se rompre lorsque le liquide de l’installation, l’utilisation ou l’entretien de refroidissement surchauffe. -
Page 9: Section 3 − Definitions
A complete Parts List is available at www.MillerWelds.com SECTION 3 − DEFINITIONS 3-1. Additional Safety Symbols And Definitions Some symbols are found only on CE products. Warning! Watch Out! There are possible hazards as shown by the symbols. Safe1 2012−05 Do not remove or paint over (cover) the label. -
Page 10: Miscellaneous Symbols And Definitions
A complete Parts List is available at www.MillerWelds.com 3-2. Miscellaneous Symbols And Definitions Water (Coolant) Amperes Input Power Output Volts Line Connection Primary Voltage Degree Of Hertz Cooling Protection Water (Coolant) Power On Indica- Rated Cooling Input Power Single-Phase Rated Maximum Rated Maximum Alternating Supply Current... -
Page 11: Section 4 − Specifications
A complete Parts List is available at www.MillerWelds.com SECTION 4 − SPECIFICATIONS 4-1. Serial Number And Rating Label Location The serial number and rating information for this product is located on the back panel. Use rating label to determine input power requirements and/or rated output. -
Page 12: Dimensions, Weights, And Mounting
4 Holes Weight 43 lb (20 kg) Mounting Bracket (Optional) Used to mount cooler to a Dynasty/Maxstar 280. Mount as shown using existing hardware. Purchase 2X Miller Part Number 251127 through the Miller Parts Dept. 805 506-A Notes OM-257811 Page 8... -
Page 13: Section 5 − Installation
A complete Parts List is available at www.MillerWelds.com SECTION 5 − INSTALLATION 5-1. GTAW Connections Tools Needed: 11/16 in. 805 500-A Fittings have 5/8-18 left-hand threads. Operation: Do not move or operate unit where Connect hoses with proper fittings as it could tip. -
Page 14: Gmaw Connections
A complete Parts List is available at www.MillerWelds.com 5-2. GMAW Connections Tools Needed: 11/16 in. 805 501-A Coolant In Hose mended fuse or circuit breaker size is 15 Do not move or operate unit where amperes. it could tip. Fittings have 5/8-18 left-hand threads. Connect hoses with proper fittings as To prevent overheating, make sure cooling Operation:... -
Page 15: Section 6 − Maintenance & Troubleshooting
A complete Parts List is available at www.MillerWelds.com SECTION 6 − MAINTENANCE & TROUBLESHOOTING 6-1. Routine Maintenance Disconnect power before maintaining. Δ = Repair n = Check Z = Change ~ = Clean l = Replace * To be done by Factory Authorized Service Agent Every ~ Blow out heat exchanger fins. -
Page 16: Troubleshooting
A complete Parts List is available at www.MillerWelds.com 6-3. Troubleshooting Trouble Remedy Coolant system does not work. Be sure input power cord is plugged into an energized receptacle. Check line fuses or circuit breaker, and replace or reset if necessary. Motor overheated. - Page 17 Notes...
- Page 18 Notes TM-216 869 Page 14 Dynasty 350/700, Maxstar 350/700...
- Page 19 Effective January 1, 2017 (Equipment with a serial number preface of MH or newer) This limited warranty supersedes all previous Miller warranties and is exclusive with no other guarantees or warranties expressed or implied. Warranty Questions? LIMITED WARRANTY − Subject to the terms and conditions below, 6 Months —...
- Page 20 Contact the Delivering Carrier to: File a claim for loss or damage during shipment. For assistance in filing or settling claims, contact your distributor and/or equipment manufacturer’s Transportation Department. © ORIGINAL INSTRUCTIONS − PRINTED IN USA 2017 Miller Electric Mfg. Co. 2017−01...