Configuration - Nokia 6136 User Manual

6136.ENv1_Orange_4july06.fm Page 47 Tuesday, July 4, 2006 12:39 PM
Select Menu > Settings
if the corresponding enhancement is or has been connected to the phone.
Depending on the enhancement, select from one of the following options:
Default profile — to select the profile that you want to be automatically
activated when you connect to the selected enhancement
Automatic answer — to set the phone to answer an incoming call automatically
after five seconds. If Incoming call alert
answer is off.
Lights — to set the lights permanently On. Select
for 15 seconds after a key press
Ignition detector > On
20 seconds after you switch off the car ignition, when the phone is connected to
the full car kit
TTY/TDD > Use TTY > Yes
settings

■ Configuration

You can configure your phone with settings that are required for certain services
to function correctly. The services are multimedia messaging, instant messaging,
synchronisation, e-mail application, streaming, and browser. Orange may also
send you these settings as a configuration message.
To save the configuration settings received as a configuration message, see
"Configuration settings service," p. 10.
Select Menu > Settings
Default configuration settings
phone. Scroll to a service provider, and select
that the configuration settings of this service provider supports. To set the
configuration settings of the service provider as default settings, select
Options > Set as default. To delete configuration settings, select Delete.
Activate default in all applications
settings for supported applications
Preferred access point
point, and select Options
bearer, and packet data access point or GSM dial-up number.
Connect to service provider support
from Orange
> Enhancements. You can select an enhancement menu
is set to Beep once
Automatic
— to automatically switch off the phone approximately
— to use text phone settings instead of headset
> Configuration and one of the following options:
— to view the service providers saved in the
Details to view the applications
— to activate the default configuration
— to view the saved access points. Scroll to an access
> Details to view the name of the service provider, data
— to download the configuration settings
S e t t i n g s
or Off, automatic
to set the lights on
47