Appendix 5: Installation And Use Of The Blower - Enerzone EB00027 Installation And Operation Manual

APPENDIX 5: INSTALLATION AND USE OF THE BLOWER

Your Enerzone stove comes with a blower assembly. The blower assembly is secured to the back
of the stove using 4 screws (screws #10 x ½'' type ''a'' pan quadrex black. The blower increases
the flow of air past heat exchange surfaces and help circulate warm air in the room. When used
regularly, the blower can provide a small increase in efficiency, up to 2 percent. However, the use
of a blower should not be used as a way to gain more output from a stove that is undersized for
the space it is intended to heat. You can also install a thermodisc to enable the blower to start or
stop automatically when the wood stove is hot or too cold. The thermodisc part number is
AC05530 for a quick connect model. Installation instructions are supplied with the thermodisc.
WOOD STOVE'S WARM AIR
WOOD STOVE
CAUTION: ENSURE THAT THE BLOWER'S AND/OR THE THERMODISC'S POWER CORD ARE NOT IN
CONTACT WITH ANY SURFACE OF THE STOVE TO PREVENT ELECTRICAL SHOCK OR FIRE DAMAGE.
DO NOT RUN THE POWER CORD BENEATH THE STOVE.
30
Destination 2.3 Installation and Operation Manual