Enerzone EB00027 Installation And Operation Manual page 27

•
Secure the brackets (K) using nuts (L) to the front top and bottom of panels (D) and (E).
•
Insert the front side of the
the bracket holes and secure the panel using two screws
•
Attach the rear panel using three screws (G).
•
Reinstall the finishing trims (B) with 8 screws (C).
•
Repeat steps above to install the decorative panel (E).
•
Reinstall the decorative top
Destination 2.3 Installation and Operation Manual
panel (D) in the front bracket
(A).
(I) and align the holes
(F).
of the panel with
27