Table of Contents
Advertisement
TIPS FOR DELICIOUS RICE
TIPS FOR COOKING DELICIOUS RICE
●
Measure rice accurately
Be sure to use the Measuring Cup provided, as other measuring cups may differ. Level the rice off at the top of the cup to
maintain accuracy.
●
Clean rice quickly
Prepare a bowl to pool water
①
Rinse rice .... First, pour plenty of water into the Inner Cooking
Pan from the bowl and stir the rice loosely 2–3 times
(within 10 seconds) by hand. Drain the water
immediately afterwards. Repeat twice.
②
Wash rice .... Wash by stirring the rice by hand 30 times (about 15
seconds), pour plenty of water from the bowl and stir
the rice loosely again. Drain the water immediately.
Repeat this washing process 2–4 times.
③
Rinse rice .... Lastly, pour plenty of water from the bowl and rinse
the rice. Repeat twice.
(Complete steps
①
–
③
within 10 minutes.)
Do not clean the rice or adjust the amount of water using hot water (35°C or above).
Warning!
Doing so will cause the rice to be cooked improperly.
●
Adjust the amount of water accordingly
Softer rice
Type of Rice
New crop
White rice with germ
Water
Reduce water slightly
Normal scale level
Adjustment
from the normal level
●If you add too much water, it may boil over through the Steam Vent.
●
Do not use strongly alkalized ionic water
Do not use alkalized ionic water that is over pH 9. Rice cooked with
strongly alkalized ionic water may appear yellow or become too glutinous.
●
Stir and loosen rice immediately after cooking
has completed
Doing so releases excess moisture, resulting in rice that is perfectly cooked with a fluffy texture.
Loosen the rice within 10 minutes after cooking completes. Not loosening the rice may cause it to clump, become too
glutinous or burn.
TIPS FOR USING THE KEEP WARM MODE
●
When keeping rice in the Inner Cooking Pan for later consumption, use the
Keep Warm mode.
● The rice may develop a foul odor or condensed moisture may fall on the rice, making it sticky, if the Keep Warm mode
is cancelled or if left in an unplugged Rice Cooker.
●
To prevent the rice from becoming dry or wet,
developing an odor or turning yellow, do not
use the Keep Warm mode for the following:
● Keeping a small amount of
● Keeping rice warm when it contains
rice warm for long hours.
additional ingredients and seasonings
● Keeping rice warm for
(mixed rice, etc.).
● Keeping foods other than rice warm
more than 12 hours.
● Adding additional rice
such as croquettes or miso soup.
● Keeping rice warm with the
while keeping rice warm.
● Reheating cold rice.
Spatula left inside the Rice Cooker.
● Keeping congee warm.
6
Wash by
stirring the rice.
Rinse the
rice quickly
with plenty
of water.
e.g.: When Cooking 2 Cups of White Rice
Old crop
Harder rice
Add a little water
to the normal level
Add water to
water level
2 for WHITE.
●
When keeping a small amount
of rice warm, gather the rice
toward the center of the Inner
Cooking Pan.
Gather rice
in center
● As the amount of rice kept
warm decreases, the rice
may dry or become wet. To
minimize this, gather the
rice toward the center of the
Inner Cooking Pan while
keeping warm.
HOW TO SET THE CLOCK
If the clock is inaccurate, set the correct time as shown below.
● The clock is displayed in 24 hours (military time).
e.g.: If the current time is 15:01 but displays 14:56.
1
Set the Inner Cooking Pan and plug in the Power Cord.
→ See "BASIC COOKING STEP 4" on pg. 8.
2
Press the Time Setting
or
Time Setting and adjust the clock to the current time.
The time display will start to blink.
button: Each press advances the time in 1-minute increments.
button: Each press moves the clock in reverse by 1-minute.
●Press and hold either button to quickly adjust in 10-minute increments.
3
The time display will stop blinking after 3 seconds,
indicating the Time Setting is completed.
If the time display still does not show the current time, repeat Step 2 to readjust the time.
● Although the clock is set before shipment from the factory, certain conditions such as room temperature may cause
it to display an inaccurate time.
● If the clock is inaccurate, the cooking will not be completed at the time you set for the Timer.
● The clock cannot be changed during Cooking, Reheating, Regular Keep Warm, Extended Keep Warm or Timer Cooking.
SOUND SIGNALS AND HOW TO CHANGE THEM
This product includes a melody function that allows you to set a melody to inform you when certain actions occur, such
as when cooking starts, when Timer operation is finished, and when cooking completes. You can also switch the melody
to a beep or to silent.
Types of Sound Signals:
You can choose the Sound Signals from the following:
Types of Sound Signals
and their meanings
The default setting at the time
Indication
of shipment from the factory.
Cooking has begun:
"Twinkle, Twinkle, Little Star"
Timer is set:
"Twinkle, Twinkle, Little Star"
Cooking / Reheating has completed:
"Amaryllis"
How to change the Sound Signal:
1
Set the Inner Cooking Pan and
plug in the Power Cord.
→ See "BASIC COOKING STEP 4" on pg. 8.
2
Hold the
button for more than 3 seconds.
Each time the TIMER button is held for more than 3 seconds, the Sound Signal will change.
①
②
Melody:
Beep:
It will play "Amaryllis" when the
It will beep 3 times when the sound
sound setting is completed.
setting is completed.
3
The setting is completed when the desired Sound Signal is heard.
● The selected Sound Signal is stored even if the Rice Cooker is unplugged.
Adjusting time
Blinks
button to initiate the
Time correction
is completed
Stops
blinking
Melody:
Beep:
Choose this setting to
Choose this setting to
change from a Melody.
disable the Sound Signal.
a beep
a beep
beeps 5 times
● You cannot change the Melody Signal for the initiation of
Reheating.
● You cannot change the Sound Signal during Cooking, Reheating,
Regular Keep Warm, Extended Keep Warm or Timer Cooking.
● If you find it difficult to change/select the Sound Signal, please
1
start over from Step
.
③
Silent:
It will beep 1 time when the sound
setting is completed.
Silent:
no sound
7
Hide quick links:
Advertisement
Table of Contents
