Polaroid PDU-1045S User Manual page 45

PROBLEM
There is no picture.
Poor AV performance.
The remote control
does not work
Other possibilities:
Static or other external interference may cause the player function abnormally. In order to
recover normal status, unplug the power-supply cord and then plug it into the outlet
again to reset the player. If problems still exist, cut off the power supply and consult your
service center or the qualified technician.
Troubleshooting
POSSIBLE CAUSE
The LCD may be off or not Turn on the LCD and choose
the correct video mode.
be in correct video mode.
The system connection may
Connect
be not correct.
correctly.
Switch AV tab on the bottom
The unit may be not in AV
of the unit to out.
out mode.
The disc may be dirty or
Clean or change the disc.
warped.
There may be some
Remove
obstructions between the
between the remote control
remote control and the
and the player.
player.
Point the remote control at
The remote control may not
the player directly.
be pointed at the player.
The batteries of remote
Make sure the polarity of
control may not be inserted
each battery is correct.
correctly.
The batteries of remote
control may be out of power
or weak.
45
POSSIBLE SOLUTION
the system
the obstruction
Replace the batteries.