Power Supply Preparation - Polaroid PDU-1045S User Manual

Using the AC Adapter
The player is supplied with an AC adapter for powering the unit and charging the battery.
1. Connect AC adapter to the right side
of the DVD player in the jack marked
DC 12V IN, as shown on the right.
2. Plug the power cord into a grounded
electrical outlet. The power indicator
will turn red.
Note: Turn player's power off before unplugging.
Note: In the case of using the adapter, the LCD screen will be brighter than with
the rechargeable battery.
Using of Car Adapter
The player is supplied with a Car Adapter for powering the unit and charging the battery
while in a vehicle.
Connect the Car Adapter Power Plug to
the unit's power jack and plug the other
end to the vehicle's 12V accessory/
cigarette socket, as shown on the right
figure.
Attention
Do not operate the unit or view video software while driving a vehicle.
Place the unit in a proper position for viewing.
Detach the battery pack when using the AC or car adapter as power source.
Disconnect the player from the Car Adapter when starting the vehicle.
Power Supply
Preparation
21