Interlogix TVR 15HD Quick Start Manual

Interlogix TVR 15HD Quick Start Manual

Advertisement

Quick Links

TVR 15HD Quick Start Guide
Figure 1: Back panel connections
1. Connect up to 16 analog cameras to BNC-type
connectors (depends on the recorder model).
2. Connect one CCTV monitor (BNC-type
connector).
3. Connect to a HDTV. The HDMI connection
supports both digital audio and video.
4. Connect four audio inputs to RCA connectors.
5. Power switch (on/off).
6. Connect to a RS-232 device.
7. Connect to ground.
Default IP address: 192.168.1.82
P/N 1073202-EN • REV C • ISS 30JUN17
8. Connect to an optional USB device such as a
mouse, CD/DVD burner or HDD.
9. Connect to a VGA monitor.
10. Connect to speakers for audio output.
11. Connect to a network.
12. Connect to a RS-485 device such as a PTZ
camera or a keypad.
13. Connect to the 12 VDC PSU (included).
14. Connect up to 16 alarm inputs.
15. Connect up to four alarm outputs.

Advertisement

Table of Contents
loading

Summary of Contents for Interlogix TVR 15HD

  • Page 1 TVR 15HD Quick Start Guide Figure 1: Back panel connections 1. Connect up to 16 analog cameras to BNC-type 8. Connect to an optional USB device such as a connectors (depends on the recorder model). mouse, CD/DVD burner or HDD.
  • Page 2 Reverse: In live view mode, use to play back the earliest video. In playback Playback buttons mode, playback a camera in the reverse direction. Pause: In live view, freeze the last image of the live display for all active cameras displayed. In playback mode, stop playback. TVR 15HD Quick Start Guide...
  • Page 3 4. Audio On: Enable/disable audio output. with a motorized lens 5. Snapshot: Capture a snapshot of a video 11. Stream Information: Display the real-time frame image. rate, bit rate, resolution and video compression. 12. Close: Close the toolbar. TVR 15HD Quick Start Guide...
  • Page 4: Package Contents

    Package contents First-time use The TruVision DVR 15HD (model TVR 15HD) The recorder has an express installation is shipped with the following items: wizard that lets you easily configure basic recorder settings when first used. It configures • IR (infrared) remote control all cameras simultaneously.
  • Page 5: Live View Mode

    • IP address - 192.168.1.82 - Or - • Subnet mask - 255.255.255.0 Menu • Right-click the mouse and select from the pop-up menu. • Gateway address - 192.168.1.1 • Server Port: 8000 TVR 15HD Quick Start Guide...
  • Page 6: Specifications

    Configures alarm and event settings. TVR 1516HD ≤ 2.5 kg (5.5 lb.) Configures system settings. Configures storage management. Configures user settings. View system information. Provides reference information to the various toolbars and menus within the interface. TVR 15HD Quick Start Guide...
  • Page 7: Legal And Regulatory Information

    Legal and Regulatory information Copyright © 2017 United Technologies Corporation. All rights reserved. Interlogix is part of UTC Climate, Controls & Security, a unit of United Technologies Corporation. All rights reserved Trademarks and patents Trade names used in this document may be trademarks or registered trademarks of the manufacturers or vendors of the respective products.

Table of Contents