Axis D2050-VE Installation Manual page 2

Read this first
Read through this Installation Guide carefully before
installing the product. Keep the Installation Guide for
future reference.
Legal considerations
Radar surveillance can be regulated by laws that vary from
country to country. Check the laws in your local region
before using this product for surveillance purposes.
Liability
Every care has been taken in the preparation of this
document. Please inform your local Axis office of any
inaccuracies or omissions. Axis Communications AB cannot
be held responsible for any technical or typographical errors
and reserves the right to make changes to the product and
manuals without prior notice. Axis Communications AB
makes no warranty of any kind with regard to the material
contained within this document, including, but not limited
to, the implied warranties of merchantability and fitness for
a particular purpose. Axis Communications AB shall not
be liable nor responsible for incidental or consequential
damages in connection with the furnishing, performance
or use of this material. This product is only to be used for
its intended purpose.
Intellectual property rights
Axis AB has intellectual property rights relating to
technology embodied in the product described in this
document. In particular, and without limitation, these
intellectual property rights may include one or more of
the patents listed at axis.com/patent.htm and one or more
additional patents or pending patent applications in the
US and other countries.
Equipment modifications
This equipment must be installed and used in
strict accordance with the instructions given in the
user documentation. This equipment contains no
user-serviceable components. Unauthorized equipment
changes or modifications will invalidate all applicable
regulatory certifications and approvals.
Trademark acknowledgements
AXIS COMMUNICATIONS, AXIS and VAPIX are registered
trademarks or trademark applications of Axis AB in various
jurisdictions. All other company names and products are
trademarks or registered trademarks of their respective
companies.
Regulatory information
Europe
This product complies with the applicable CE marking
directives and harmonized standards:
•
Electromagnetic Compatibility (EMC) Directive
2014/30/EU. See Electromagnetic compatibility (EMC)
on page 2 .
•
Radio Equipment Directive (RED) 2014/53/EU. See
Radio transmission on page 2 .
•
Low Voltage (LVD) Directive 2014/35/EU. See Safety
on page 3 .
•
Restrictions of Hazardous Substances (RoHS) Directive
2011/65/EU. See Disposal and recycling on page 3 .
A copy of the original declaration of conformity may be
obtained from Axis Communications AB. See Contact
information on page 3 .
Electromagnetic compatibility (EMC)
This equipment has been designed and tested to fulfill
applicable standards for:
•
Radio frequency emission when installed according to
the instructions and used in its intended environment.
•
Immunity to electrical and electromagnetic phenomena
when installed according to the instructions and used
in its intended environment.
USA
This equipment has been tested using a shielded network
cable (STP) and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense.The product shall be
connected using a shielded network cable (STP) that is
properly grounded.
Europe
This digital equipment fulfills the requirements for RF
emission according to the Class A limit of EN 55032. The
product shall be connected using a shielded network cable
(STP) that is properly grounded. Notice! This is a Class A
product. In a domestic environment this product may cause
RF interference, in which case the user may be required
to take adequate measures.
Australia/New Zealand
This digital equipment fulfills the requirements for RF
emission according to the Class A limit of AS/NZS CISPR 32.
The product shall be connected using a shielded network
cable (STP) that is properly grounded. Notice! This is a
Class A product. In a domestic environment this product
may cause RF interference, in which case the user may be
required to take adequate measures.
Radio transmission
This equipment may generate or use radio frequency energy.
The user could lose the authority to operate this equipment
if an unauthorized change or modification is made.
USA
This equipment complies with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference
that may cause undesirable operation.
This product complies with FCC radiation exposure limits
for an uncontrolled environment. This equipment shall
be installed and operated with a minimum distance of
20 cm (7.9 in) between the user and the device.
Canada
This device complies with Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of the
device.
This product complies with IC radiation exposure limits
for an uncontrolled environment. This equipment shall
be installed and operated with a minimum distance of
20 cm (7.9 in) between the user and the device. Transmitter