Download Print this page

Detection Area; Daylight Sensor - Above All HC419V Instruction Manual

Microwave motion sensor

Microwave Motion Sensor HC419V

Instructions Manual

SETTINGS

1. Detection area

Detection area can be reduced by selecting the combination

on the DIP switches to fit precisely for each specific

application.

2. Hold-time

Hold-time means the time period you would like to keep the

lamp on 100% after the person has left the detection area.

The daylight threshold can be set on DIP switches, to fit for

particular application.

4. Stand-by period(corridor function)

This is the time period you would like to keep at the low light

output level before it is completely switched off in the long

absence of people.

note:

0 means on/off control;

+ means 2 steps of dimming control, fixture never switch

off.

5. Stand-by dimming level

This is the dimmed low light output level you would like to

have after the hold-time in the absence of people.

Add: 1501 Industrial Way N, Toms River, NJ 08755 Phone: 866-222-8866 E-mail: info@abovealllighting.com