Advertisement
5. ambient daylight threshold
With simple operation, rapidly turn off/on the fixture 2 cycles within 2 sec:
1. the green LED on the sensor flashes slowly for 5 seconds, meanwhile the fixture blinks twice.
2. the daylight sensor measures and remembers the surrounding lux for 1 sec.
3. the fixture and green LED is on for 10s to indicate the success of learning.
This feature enables the fixture to function well in any real application circumstance, where the daylight
penetrated into fixture may vary a lot.
* The latest surrounding lux value overwrites previous lux value learned.
* Both the setting on DIP switch and the learned ambient lux threshold can overwrite each other.The
latest action stays in validity.
6. loop-in and loop-out
double L N terminal makes it easy for wire loop-in and loop-out, saves the cost of terminal block and
assembly time.
oops:
1. motion sensor overwrites daylight sensor, meanning the daylight sensor starts to check the
ambient natural light only when the lamp is switch off (motion hold-time ellapsed).
2. this 1-10v output is isolated, SELV output.
7. wiring diagram
1 sensor controls a group of ballast /driver--
Add: 1501 Industrial Way N, Toms River, NJ 08755 Phone: 866-222-8866 E-mail: info@abovealllighting.com
Web: www.AboveAllLighting.com ©2016 ABOVE ALL Lighting, Inc. All rights reserved
Microwave Motion Sensor HC419V
Instructions Manual
3
Advertisement
