Advertisement
ASSEMBLY INSTRUCTIONS PAGE 2
H
B
BOTTOM VIEW
5. Turn the assembled platform over so that the top of
the platform is on the ground.
Attach Handle Rail
H
platform using 2-M12x65mm Bolts for each Handle Rail.
C
B
7. Turn the platform upright.
Attach Seat Pedestal
using 4-M12x45mm Bolts.
Distributed by Tahsin Industrial Corp USA, 685 Route 10 East, Randolph, NJ 07869
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
H
65
A
to the bottom of the assembled
A
45
C
to the center of the platform
BOTTOM VIEW
B
75
J
6. With the platform still upside down, Attach
Rear Leg Brace
J
to the rear of the platform using
2-M12x75mm Bolts for each Rear Leg Brace.
RED BOLT
C
8. Disassemble the RED Bolt with Large Washer.
Place the Large Washer on top of the Seat Pedestal
the assembled Seat on the Seat Pedestal. Place a metal
washer onto the RED bolt, then insert a nylon washer on the
bolt. Insert the bolt through the Seat Platform, Large Washer,
and the Seat Pedestal. Place another nylon washer onto the
bolt, then the last metal washer and tighten the nut.
WWW.TREESTANDCUSTOMERSERVICE.COM
MODEL: WMTS-15R
15FT. TRIPOD
A
75
J
E
C
. Hold
©2013 (rev. 12/12)
Advertisement
