Advertisement
ASSEMBLY INSTRUCTIONS PAGE 1
ALL PHOTOS TAKEN FROM FRONT VIEW UNLESS OTHERWISE NOTED
A
40
1. Slide Left Platform
A
into Right Platform
bolt on each side of platform. Use 2-M12x110mm bolt in the middle
of the platform. Set aside for future use.
30
3. Slide both halves of Shooting Rail
1-M10x30mm bolt on each side. Set aside for future use.
Distributed by Tahsin Industrial Corp USA, 685 Route 10 East, Randolph, NJ 07869
CUSTOMER SERVICE DEPARTMENT 1-866-972-6168
40
110
B
. Use 1-M12x40mm
B
F
30
F
F
together and secure with
G
55
E
2. Attach Seat Back
D
to Seat Platform
Bolt on each side.
Attach Armrest
G
to Seat Back
2-M12x55mm Bolt at each connection point.
Set aside for future use.
W
4. Insert the crimped end of Male Brace
near the pivot point. Insert 1-M10x30mm Bolt at each
Brace
W
point. Do this for ALL remaining Cross Braces.
Set aside for future use.
WWW.TREESTANDCUSTOMERSERVICE.COM
MODEL: WMTS-15R
15FT. TRIPOD
D
55
E
using 1-M12x55mm
D
and Seat Platform
E
using
30
T
T
into the end of Cross
©2013 (rev. 12/12)
Advertisement
