Lubrication Guide
Check and lubricate all components at the intervals outlined in the
Periodic Maintenance Chart beginning on page 69. Items not
listed in the chart should be lubricated at the General Lubrication
interval.
NOTE:
The a-arms and upper control arms are lubricated at the factory, and
no additional lubrication will be needed. However, if these components
are subjected to severe use, grease zerks have been provided for
additional lubrication at the user's discretion.
Item
Engine Oil
Brake Fluid
Transmission Oil
Demand Drive
Fluid (Front
Gearcase)
ADC Fluid
Front Prop Shaft
Yoke
Lube
PS-4 PLUS Performance
Synthetic 2W-50
DOT 4 Only
Polaris AGL Synthetic
Gearcase Lube
Demand Drive LT Pre-
mium Fluid
Polaris ADC Fluid
Polaris Premium U-Joint
Lube
MAINTENANCE
Capacity at
Fluid Change
2 qt. (1.9 l)
---
32 oz. (948 ml) See page 80.
9.3 oz. (275 ml) See page 82.
---
---
Front Prop Shaft Yoke
Method
See page 74.
See page 88.
See page 84.
Grease fittings (3
pumps maximum)
every 800 km, before
long periods of stor-
age, or after pressure
washing or submerg-
ing.
73