Lubrication Guide
Check and lubricate all components at the intervals outlined in the
Periodic Maintenance Chart beginning on page 74. Items not
listed in the chart should be lubricated at the General Lubrication
interval.
NOTE:
The a-arms and lower control arms are lubricated at the factory, and
no additional lubrication will be needed. However, if these components
are subjected to severe use, grease zerks have been provided for
additional lubrication at the user's discretion.
Item
Engine Oil
Brake Fluid
Transmission Oil Polaris AGL Synthetic
Demand Drive
Fluid (Front
Gearcase)
ADC Fluid
Front Prop Shaft
Yoke
Lube
PS-4 PLUS Performance
Synthetic 2W-50
DOT 4 Only
Gearcase Lube
Demand Drive LT
Premium Fluid
Polaris ADC Fluid
Polaris Premium U-Joint
Lube
Capacity at
Fluid Change
2 qt. (1.9 l)
---
32 oz. (948 ml) See page 85.
9.3 oz. (275 ml) See page 87.
---
---
Front Prop Shaft Yoke
MAINTENANCE
Inspection
Procedure
See page 80.
See page 38.
See page 89.
Grease fittings (3
pumps maximum) every
500 miles, before long
periods of storage, or
after pressure washing
or submerging.
79