Advertisement
Available languages
Available languages
ENGLISH
10
-
Express milk warming setting for contents over and
including 180ml/6oz:
Select this setting when you want to quickly warm a bottle
of milk with a content over and including 180ml/6oz.
The bottle needs to be taken out immediately after
warming to the right temperature, otherwise the milk will be
overheated.
-
Keep warm setting: Milk is warmed at a slower speed and
be kept at right temperature.
-
Defrost setting: Defrost a bottle/container of milk/baby
food to liquid state. No warming occurs.
Using the bottle warmer with express milk warming
setting
1
Put the appliance plug in the wall outlet (Fig. 3).
2
Place a bottle in the bottle warmer (Fig. 4).
3
Fill the bottle warmer with drinking water up to the level
of the milk in the bottle. In case of large amounts of milk,
the maximum level of water is approximately 1 cm below
the top of the bottle warmer. An accurate water level
ensures correct warming performance (Fig. 5).
4
Select the desired setting based on the milk volume. See
the express warming reference table at the end of this
chapter to check how long the milk needs to be warmed
in the selected setting (Fig. 6).
Note: The speed of warming milk depends on the amount of
the milk warmed and on its initial temperature, i.e. room
temperature (70°F/20°C) or fridge temperature (40°F/5°C).
5
The orange light goes on when you select a setting. This
indicates that the bottle warmer is on (Fig. 7).
Note: While warming the milk circulates and heats evenly.
6
Check the express warming reference table for the time
required to warm the milk. Remove the bottle from the
Advertisement
