Select Com Port; Power State Selection (S4 Or S5); Ips Status; Final Countdown For Shutdown - Advantech UNO-IPS2730 User Manual

3.2.1

Select COM Port

Select the UNO-IPS2730 COM port.
3.2.2

Power State Selection (S4 or S5)

This option allows you to select the power status of your PC between hibernation*
(S4) or shutdown* (S5) when UNO-IPS2730 is activate.
Note! Hibernation (S4): All data/programs status will be saved in storage. You
can resume you previous working state after S4 awakens.
Shut down (S5): Shutdown process can be paused due to unfinished
program execution or unsaved data.
3.2.3 UNO-IPS2730 Status
UNO-IPS2730 working status: green
mal.
DC-in: Shows if DC power source for UNO-IPS2730 is normal or not.
Battery: Shows if UNO-IPS2730 battery is working normally or not.
3.2.4

Final Countdown for Shutdown

The UNO-IPS2730 will shutdown / hibernate your PC after the timer counts down to
zero.
Note! The time can be adjusted between 5 to 360 seconds or maximum bat-
tery supply time. Please refer to 4.3.1 and 4.3.2 for further settings.
Note! If stable DC power is supplied to UNO-IPS2730 before the timer counts
down to zero, the value will automatically be reset and stop counting.
3.2.5

Operating Temp. for Battery Pack

This section represents the current battery pack temperature.
Note! The maximum operating temperature is 45
3.2.6 Max. Time to Turn Off UNO-IPS2730
If a power shortage occurs, UNO-IPS2730 will display the dynamic estimated time of
power left from UNO-IPS2730's battery.
Note! This time will be adjust based on current power usage of your PC.
means normal and red
.
°C
13 UNO-IPS2730 User Manual
means abnor-