RX-V565/HTR-6250/AX-V565
When checking the P.C.B.s:
•
Place the P.C.B.s (with rear panel) upright. (Fig. 3)
•
Connect the ground points of the heat sink, rear pan-
el and MAIN (1) P.C.B. (G1000) to the chassis with a
ground lead or the like. (Fig. 3)
•
When connecting the flexible flat cable, be careful
with polarity.
•
Reconnect all cables (connectors) that have been
disconnected.
Be sure to use the extension cable for servicing for
the following section.
DIGITAL P.C.B. CB20 to OPERATION (1) P.C.B. CB401:
MF125400 (25P, 400mm, P=1.25)
OPERATION (1) P.C.B. CB402 to OPERATION (2) P.C.B.
CB461:
MF109400 (9P, 400mm, P=1.25)
20
P.C.B. をチェックする場合には:
・ リアパネルと一緒に P.C.B. を立ち上げて置きます。
(Fig. 3)
・ ヒートシンク、リアパネル、MAIN(1)P.C.B. の G1000
のアースをリード線等でシャーシに接続してくださ
い。 (Fig. 3)
・ フラットケーブルを接続する際、極性に注意してく
ださい。
・ 外したケーブル(コネクター)をすべて接続します。
ただし次の区間は、サービス用延長ケーブルを使用
してください。
DIGITAL P.C.B. CB20 ∼ OPERATION(1)P.C.B. CB401:
MF125400(25P、400mm、P=1.25)
OPERATION (1) P.C.B. CB402 ∼ OPERATION (2) P.C.B.
CB461:
MF109400(9P、400mm、P=1.25)
Rear panel
リアパネル
Ground lead
アース線
Heat sink
ヒー トシンク
Fig. 3
Ground lead
アース線
G1000
Chassis
シャーシ